Fuji DI-HL Film Laser 14x17in (35×43 cm) / 100 feuilles

DI-HL 35.4 x 43cm – 100 sheets + 1 protective sheet

DI-HL 25.7 x 36.4cm – 150 sheets + 1 protective sheet

DI-HL 25.4 x 30.5cm – 150 sheets + 1 protective sheet

DI-HL 20 x 24.8cm – 150 sheets + 1 protective sheet

The film pack contains a protective sheet in the bottom, in addition to a specified number (100 or 150) of films. This protective sheet will remain in the film pack even after all films have been printed and it cannot be used for image recording. Discard it together with the film pack.

1. Be sure to store unused films contained in the film pack in a cool, dry, and dark place, avoiding radioactivity and reactive gases, the same as for the conventional wet type film.

Temperature: 10 to 23˚C (50 to 64˚F)
Relative Humidity : 45 ± 15%RH

2. Do not take unused films out of the film pack that has once been loaded into the DRYPIX nor add films to the film pack. This will result in misoperation or failure of the equipment. The unused film should
be handled in the film pack. Do not touch unused films with bare hands. This may cause artifacts to appear
on recorded images.

1. Store recorded films in a cool, dry, and dark place. Temperature and humidity above these conditions, the density of recorded images may change. Long-term storage at high temperatures, high humidity, and/or daylight conditions, such as in-car or in-room during summer, may cause discoloration.
2. For the long-term storage performance of the recorded film, we assume based on the result of the acceleration
test that it will be over 30 years at 25˚C until the portion on an image of density = 1.2 at the time of output to
10% (∆ D=0.12).