G138Si Стартер Проявящ Разтвор

G138Si STARTER

It is recommended to use G138Si starter each time you replace developer. Adding 25 ml of G138Si starting solution per liter of replenisher will allow you to obtain images featuring optimum sensitometric characteristics. Moreover, the difference in image quality during start-up time will be minimized in that way.

Детайли

General rules

Temperature adjustment by 1 °C equals speed adjustment by 2 to 3 log E points.

Подходящо за

All kinds of processors, except tabletop processors Not suited for manual processing.

Цикли на обработка

CURIX HT-330 U, CURIX Compact Plus, Classic E.O.S. and Compact E.O.S.: HT, IP, RP processing cycles at 32 °C to 38 °C CURIX HT-530 E.O.S.: 45 s processing cycle at 36 °C to 38 °C 90 s and 180 s processing cycles at 32 °C to 35 °C

Норма на допълване

Ranging from 300 to 600 ml/m²

Packaging:

One shipping carton G139 contains concentrate for 2×20 l. of developer

Безопасност

Consult the Safety Data Sheet (SDS) for information relating to safety, health and environmental aspects. Please follow the safety instructions mentioned on the bottles carefully.

Условия

Make sure the processing room is well ventilated: air ventilation of 10 times the room volume per hour will prevent build-up of chemicals in the air.

Специални благодарности

Become our partner Today!

ПОДОБНИ ПРОДУКТИ

Свързани продукти from Medelem: G138I Developer | G139 Developer | G334(I) Fixer